  |
 |
我公司燃油粘度計基本型可以完全替換7829系列粘度計， FVM系列粘度計，HFVM系列粘度計；Art No. 95431粘度計
1.測量原理一致 (振動音叉式 vibrating fork)
2.過程接口一致 (錐形座壓接1-1/2 inch, cone-seat compression fitting)
3.粘度量程一致 (0-50cst)
4.粘度、溫度2個 4-20mA輸出一致
5.供電電源一致 (24VDC)
6.區別: 原廠一體式設計，本公司分體式設計，粘度傳感器與接線盒分開，電子線路板避開高溫，使用壽命更長，性能更穩定
7.加配各類過程連適配器，可以完美替換各類毛細管粘度計capillary type viscosity sensor，振動扭轉粘度計torsional viscosity sensor等
型號Model: DG series
1. Viscosity and Temperature Sensor
Viscosity Measuring Range: 0-50cst
Viscosity Accuracy: ±2% instantaneous or 0.5cst
Temperature Measuring Range: 0-200℃
Temperature Accuracy: ± 1 ℃
Temperature Transmitter: Pt100 Element
Max Operating Temperature: 180℃
Max Pressure: 105bar (1450psi)
Measuring Principle: Vibrating Tuning Fork Type
Sensor Material: 316L Stainless Steel
Vibrating Tine Finish Material: DLC (Diamond Like Carbon, Diamond-like Carbon coating)
Process connection: 1.5" Cone seat
Signal Cable Length: 5 metres, integrated with sensor
Protection Class: IP65
Weight: Approx. 2 kg
2. Interface Box
Box Material: Cast Aluminium
Dimension(L×W×D): 250×120×82 mm
Mounting: Wall Mounting
Input Signal: From Sensor
Output Signal:
---- Viscosity: Active 4-20mA → 0-50cst, current loop
---- Temperature: Active 4-20mA → 0-200 ℃, current loop
Response Time: Less than 3 minutes
Communication Interface: RS485 Modbus
Supply Voltage: 10-28VDC(typical 24VDC), Max 4 W
Cable Connection:
---- 1 * M16×1(Input Signal)
---- 1 * M20×1.5(Output Signal)
---- 1 * M20×1.5(Supply Voltagel)
Protection Class: IP65
Ambient Temperature: - 20 - + 55℃
Weight: Approx. 3 kg
|
可完全替換:
solartron mobery VISCOMASTER DYNAMIC 7829系列粘度計
Emerson Micro Motion Viscomaster Dynamic Viscosity Meter 7829系列粘度計
Emerson micro motion Fork Viscosity Meters，F(xiàn)VM系列粘度計，High performance multi-variable viscosity meter
Micro Motio Heavy Fuel Viscosity Meter (HFVM) Viscomaster，HFVM系列重質燃油粘度計
Aquametro VISCOMASTER系列粘度計 Art No. 95431
TYPE/Model舉例:
7829FEANAJRBBA，7829FENNAJRHBA，7829FEANAZREBAV1，7829FEANAJRBCA，7829FEANAJRBCA，7829FEANAEBBBAA，7829FEANAJRJBA
HFVM1L729HNC3FJRE77Z
Art No. 95431
|
 |
 |
我公司燃油粘度計在基本型基礎上，加配一個改裝適配器retrofit adapter，可以升級、改造、替換各國各型各系列毛細管粘度計Capillary type viscosity sensor。
1.原毛細管粘度計配套ELECTRONIC VERSION電子式變送器的，可以利用原粘度控制器，原電動調節閥。原毛細管粘度計配套PNEUMATIC VERSION氣動式變送器的，需要同時替換原氣動粘度控制器為我公司電子式粘度控制器，替換原氣動調節閥為電動調節閥，原配氣管路不再需要。
2.我公司粘度計供電電源為24VDC，我公司電子式粘度控制器供電電源為220VAC
3.粘度量程與原各型各系列粘度計一致
4.粘度、溫度2個 4-20mA輸出output
5.我公司粘度傳感器與接線盒分開設計，電子線路板避開高溫，使用壽命更長，性能更穩定
6.加裝改裝適配器，替換原毛細管粘度傳感器時：
6-1. Remove items ②, ③, ⑤, ⑥, ⑦, ⑧, ⑨, the housing ① and optional thermometer ④ are left.
6-2, The retrofit adapter matches with the housing.
6-3. The Viscomaster is fitted into the adapter.
6-4. Install Interface Box in appropriate locations.
6-5. Wiring, 24V DC power supply and output signal.
型號Model: DG series
1. Viscosity and Temperature Sensor
Viscosity Measuring Range:
----VAF instruments：0-25 mPa.s or 0-50 mPa.s
----MAR-IN CONTROLS: 0-22mPa.s (0-25cSt), 0-44mPa.s (0-50cSt)
----NAKAKITA SEISAKUSHO：0-30 cst or 0-30 mm2/s
----DAEHO：0-25 cst (mPa.s) or 0-50 cst (mPa.s)
Temperature Measuring Range: 0-200℃
Temperature Accuracy: ± 1 ℃
Temperature Transmitter: Pt100 Element
Max Operating Temperature: 180℃
Max Pressure: 105bar (1450psi)
Measuring Principle: Vibrating Tuning Fork Type
Sensor Material: 316L Stainless Steel
Vibrating Tine Finish Material: DLC (Diamond Like Carbon, Diamond-like Carbon coating)
Process connection: 1.5" Cone seat
Signal Cable Length: 5 metres, integrated with sensor
Protection Class: IP65
Weight: Approx. 2 kg
2. Retrofit Adapter
Material: Carbon Steel
Process Connection: retrofit adapter
Weight: Approx. 5 kg
3. Interface Box
Box Material: Cast Aluminium
Dimension(L×W×D): 250×120×82 mm
Mounting: Wall Mounting
Input Signal: From Sensor
Output Signal:
---- Viscosity: Active 4-20mA → 0-50cst, current loop
---- Temperature: Active 4-20mA → 0-200 ℃, current loop
Response Time: Less than 3 minutes
Communication Interface: RS485 Modbus
Supply Voltage: 10-28VDC(typical 24VDC), Max 4 W
Cable Connection:
---- 1 * M16×1(Input Signal)
---- 1 * M20×1.5(Output Signal)
---- 1 * M20×1.5(Supply Voltagel)
Protection Class: IP65
Ambient Temperature: - 20 - + 55℃
Weight: Approx. 3 kg
|
可升級、改造、替換各國毛細管粘度計：
第一家：VAF instruments各系列毛細管粘度計
VAF Viscotherm V92系列毛細管粘度計Capillary type viscosity sensor
VAF Viscotherm Series V92 Model VC Electronic Component System
VAF Viscotherm sensor Series V92 Model EHC毛細管粘度計
VAF Viscotherm Series V12 Pneumatic System
VAF Instruments V52 VISCOPAK SYSTEM
an in-line automatic control System for the viscosity of heavy fuel oil
第二家：MAR-IN CONTROLS B.V.毛細管粘度計
MAR-IN CONTROLS VISCOTROL viscosity sensor
ELECTRONIC VERSION type，
PNEUMATIC VERSION type，SG65
Viscosity measurement and control system
SPECIFICATION：
1. VISCOTROL TRANSMITTER：
---Housing material : steel
----Capillary : Teflon coated (PATENTED)
----Connections : flanged 2”according DIN PN40 (other on request)
----Max. operating pressure : 10 bar with standard mechanical seal and 40 bar with non-standard mechanical seal.
----Max. operating temperature : 200° C
----Maximum flow : 30 m3 /h
----Viscosity range : 0 – 22 mPas (0 -25 cSt), 0 – 44 mPas (0 –50 cSt),other range on request
2. Electric motor
----Supply Voltage : 220/380V, 240/415V, 260/440V, 280/480V, 220V , 260V, 110V
----Max. Ambiant Temp. : 60° C
3. Manifold material : Steel
4.1. PNEUMATIC VERSION
----Supply pressure : 1,4 bar
----Output signal : 0,2 - 1 bar (3 – 15 psig)
-----Air consumption : 0.5 Nm3/h
----Accuracy : within 1.0% of full scale at constant net frequency
----Temperature effect : less than 0,05% per °C
----Controller control mode : proportional + integral
4.2. ELECTRONIC VERSION
----Power Supply dp. transmitter : 13,5 - 30 Vdc
-----Power Supply controller : 230 V ac, 115V ac, 24 Vac, 50/60Hz
-----Output signal : 4 - 20 mA
-----Power consumption controller : approx. 7 VA
----Accuracy controller : 0,1% of measuring range
----Accuracy dp transmitter : <± 0,2% at constant net frequency
第三家：NAKAKITA SEISAKUSHO CO.,LTD,毛細管粘度計
NAKAKITA SEISAKUSHO VISCO-DETECTOR NS777C viscosity sensor
FUEL OIL VISCOSITY DETECTOR NS777C & NS777D
第四家：DAEHO FLOW INSTRUMENTS CO., LTD.毛細管粘度計，South Korea
viscosity sensor, VISCOSUM SENSOR，VISCUM SENSOR COMPLETE
Type: V15，V1513，V1514，V1514212，V1515，V1516，V1517，V1518，V1519
MARIN VISCOSITY CONTROL SYSTEM: VISCOSUM SENSOR ASSEMBLY V15；PNEUMATIC DIFFERENTIAL PRESSURE TRANSMITTER + MANIFOLD VT20；PNEUMATIC CONTROL STATION VC30，F(xiàn)ILTER REGULATOR COMPLETED WITH PRESSURE GAUGE VF70；STEAM CONTROL VALVE WITH HANDWHEEL FOR MANUAL OVERIDE VL20；MOTOR STARTER VM90；PNEUMATIC ALARM SWITCH VA60；STEAM STRAINER
VISCOSUM SENSOR Spare Parts:
HOUSING，BRASS PACKING，THERMO NETER，SOCKET HEAD CAPSCREW，S.H.SCREW + WASHER，SIGNAL STUD，O”-RING，SIGNAL STUD，MAIN FLANGE，PACKING HOUSE SIDE，PACKING HOLDER SIDE，ADAPTER，S.H.SCREW + WASHER，LOCK PIN，PACKING HOLDER，S.H.SCREW + WASHER，COUPLING FOR PUMP，COUPLING CASE，COUPLING FOR MOTOR，LOCK SCREW，MOTOR，dS.H.SCREW + WASHET，NUT，MECHANICAL SEAL，DRIVE SHAFT，RING，DISTANCE TUBE，BALL BEARING，SPACER TUBE，S.H.SCREW + WASHER，PLATE，GEAR PUMP，PUMP，PUMP PACKING，PLATE，GEAR PUMP，DEAIRATION PLUG JOINT，SIGNAL PIPE，CAPILLARY (0-25CST)，CAPILLARY (0-50CST)，S.H.SCREW + WASHER+NUT，PACKING CAPILLARY
第五家：毛細管粘度計
viscosity sensor
|
 |
 |
我公司燃油粘度計在基本型基礎上，再配上一個傳感器安裝室Sensor Housing，就可以整套替換VISCOSENSE 2，VISCOSENSE 3，VISCOSENSE 3D，viscosity sensor。
1. 測量原理不一致，我公司為振動音叉式 vibrating fork，原廠為振動扭動式 torsion pendulum
2.供電電源不一致，我公司接線盒供電電源為24VDC，原廠供電電源為100-230VAC
3.傳感器安裝室口徑，法蘭標準，長度可以一致 (訂貨時提供原傳感器安裝室口徑，法蘭標準)
4.粘度量程，溫度量程與原廠一致 (訂貨時提供粘度量程)
5.粘度、溫度2個 4-20mA輸出output，與原廠一致
6.傳感器與接線盒分開式設計，與原廠一致
7.接線盒長度，寬度，高度，安裝尺寸，與原廠一致
型號Model: DG series
1. Viscosity and Temperature Sensor
----Viscosity Measuring Range: 0-25 mPa.s or 0-50 mPa.s
2. Sensor Housing
---- Material: Carbon Steel
---- Flange connections DN50mm, Length 150mm; DN65mm, Length 160m; DN80mm, Length 165mm; DN100mm, Length 185m, DIN, ANSI or JIS
----Maximum pressure rating: 40 bar
3. Interface Box
----Supply voltage 20-28VDC
|
可整套替換VAF instruments，Alfa Laval Viscochief以下粘度計：
1. VISCOSENSE 2 Sensor，Viscosity range 0-25/50mPa.s
1.1. viscosity and temperature measuring SENSOR, VISCOSENSE
1.2. SENSOR HOUSING
----Material housing ductile iron
----Flange connections DN50mm, Length 150mm; DN65mm, Length 160m; DN80mm, Length 165mm; DN100mm, Length 185m, DIN, ANSI or JIS
----Maximum pressure rating 40 bar
1.3. INTERFACE BOX
----VISCOSENSE Interface box type nr. 0379-0148 0379-0106 0229-0111
----Supply voltage 100-230VAC, 50/60 Hz
2. VISCOSENSE 3 Sensor，Viscosity range 0-25/50mPa.s
2.1. viscosity and temperature measuring SENSOR, VISCOSENSE 3, type nr. 0279-0096
2.2. SENSOR HOUSING
----Material housing ductile iron
----Flange connections DN50mm, Length 150mm; DN65mm, Length 160m; DN80mm, Length 165mm; DN100mm, Length 185m, DIN, ANSI or JIS
----Maximum pressure rating 40 bar
2.3. INTERFACE BOX
---- VISCOSENSE 3 Interface box type nr. 0279-0112
----Supply voltage 100-230VAC, 50/60 Hz
3. VISCOSENSE 3D Sensor, Viscosity range 0-25/50mPa.s
3.1. viscosity and temperature measuring SENSOR, VISCOSENSE 3D, type nr. 0279-0110
3.2. SENSOR HOUSING
----Material housing ductile iron
----Flange connections DN50mm, Length 150mm; DN65mm, Length 160m; DN80mm, Length 165mm; DN100mm, Length 185m, DIN, ANSI or JIS
----Maximum pressure rating 40 bar
3.3. INTERFACE BOX
---- VISCOSENSE 3D Interface box type nr. 0379-0382
----Supply voltage 100-230VAC, 50/60 Hz
4. Alfa Laval Viscochief
4.1. VISCOCHIEF SENSOR, viscosity and temperature
4.2. SENSOR HOUSING
----Material housing ductile iron
----Flange connections DN50mm, Length 150mm; DN65mm, Length 160m; DN80mm, Length 165mm; DN100mm, Length 185m, DIN, ANSI or JIS
----Maximum pressure rating 40 bar
4.3. INTERFACE BOX
---- VISCOSENSE 3D Interface box type nr. 0379-0132
----Supply voltage 100-230VAC, 50/60 Hz
Oil viscosity control for fuel supply systems
|
 |
 |
我公司燃油粘度計在基本型基礎上，加配一個方法蘭改裝適配器square flange retrofit adapter，替換Alfa Laval EVT-20粘度計
|
替換Alfa Laval EVT-20
Viscochief MKII Viscosity Control System
|
|
|
我公司燃油粘度計在基本型基礎上，加配一個法蘭改裝適配器flange retrofit adapter，替換Alfa Laval EVT-10C粘度計
|
替換Alfa Laval EVT-10C
Viscochief Viscosity Control System
|
|
|
我公司燃油粘度計在基本型基礎上，加配一個焊接式適配器retrofit adapter，可以替換鷺宮製作所SAGINOMIYA AVM毛細管粘度計
|
替換鷺宮製作所SAGINOMIYA AVM毛細管粘度計
Viscosity Sensor (AVM)
UNIT OF VISCOSITY CONTROL (TYPE VCU)
|
|
